反应粘结型防水卷橙

YN-B705 GTS new plastic fiber polymer self-adhesive waterproof membrane

Implementation standard：GB/T 35467-2017（Class H）

Specifications：Thickness: 1.5mm/2.0mm , Width: 1.0 mm , Length: 20m/15m
Note: Other specifications and sizes can be determined by negotiation between the supplier and the buyer.

This product is a polymer membrane-based waterproofing roll made of long-fiber geomembrane cloth as the surface reinforcement material and a rubber-modified asphalt self-adhesive layer containing active additives.

The roll material can be constructed by either cement slurry bonding (wet laying method) or self-adhesive method (dry laying method). It has the characteristics of resistance to heavy pressure, scratches and punctures. It is especially suitable for waterproofing projects with intersecting construction processes, narrow working surfaces and high progress requirements.

Product Features
  1. Possess good self-healing and creep properties;
  2. Strong extensibility, adapting to base deformation;
  3. Possess good corrosion resistance and stability;
  4. Cold construction is safe and environmentally friendly;
  5. The design of flexible isolation layer after coil construction can be omitted;
  6. It has certain mechanical puncture resistance.
Scope of application

Waterproofing projects for basements, roofs, pools, etc.

Precautions
  1. When geotextile-covered rolls are overlapped horizontally, the butt joint method is adopted;
  2. Use polymer cement slurry to seal or double-sided self-adhesive tape to bond the roll material. The width of the double-sided self-adhesive tape used for butt joint shall not be less than 150mm.
  3. When dry paving, the base surface must be dry, flat and clean;
  4. When wet paving, it is necessary to prepare cement slurry with polyethylene glue powder and cement above 325 and stir evenly into a slurry.