YN-C810高聚物改性沥青基层处理剂

YN-C810 polymer modified asphalt base treatment agent

Implementation standard：JC/T408-2005

Specifications：50kg/barrel


This product is made by grinding the base asphalt with an anionic emulsifier through a colloid mill, so that the asphalt is diffused into water and liquefied into an emulsion-state asphalt with very low viscosity and good fluidity at room temperature.


Product Features


  1. Cold construction, non-toxic, odorless and pollution-free;
  2. Can be constructed on wet base surface and has good adhesion with concrete base surface;
  3. Short drying time and construction period;
  4. Good resistance to high temperature, aging and chemical corrosion.

Scope of application


  1. Suitable for waterproofing of elevated and overpass bridge decks;
  2. It can also be used for waterproofing of buildings (roofs, basements, etc.).

Precautions


  1. This product easily absorbs water and moisture, so it must be used up in one go after opening;
  2. This product should be applied in an environment of 5~40℃;
  3. This product will generate a lot of heat when solidifying, so be careful to prevent burns;
  4. This product will be irritating if splashed into eyes, please rinse with clean water immediately.