自粘防水卷材蓝

YN-B702 PET wet-laid self-adhesive waterproof membrane

Implementation standard：GB/T 35467-2017(Class H)

Specifications：Thickness: 1.5mm/2.0mm , Width: 1.0mm , Length: 25m /20m/ 15m

Note：Other specifications and sizes can be determined by negotiation between the supplier and the buyer.

This product is a self-adhesive polymer membrane-based waterproofing roll made of aluminized polyester film as the surface reinforcement material, covered with rubber-modified asphalt self-adhesive containing active additives .

During construction, the roll material can be used with cement slurry (wet laying method) or with self-adhesive bonding (dry laying method). It is suitable for waterproofing projects with many intermittent construction times. When the roll material is exposed for a long time after construction, it can reduce wrinkles and bulging after the roll material is laid .

Product Features
  1. The coiled material is soft , and its bonding performance is effectively combined with the base layer , making it more suitable for construction on complex base surfaces ;
  2. Adopt cement mortar bonding, safe and environmentally friendly ;
  3. The rubber has excellent creep performance, and even if it is punctured, it is not easy to seep, and maintenance is convenient ;
  4. The construction is simple, it can be self-adhesive and wet-laid ;
  5. High cost performance and wide application range ;
  6. Can be used for emergency temporary leak repair projects on steel roofs ;
  7. It is not affected by the moisture content of the base layer and construction can be carried out without water accumulation on the base surface, which greatly shortens the construction period.
Scope of application

It is widely used in waterproofing projects of various industrial and civil buildings, and is suitable for waterproofing projects in basements, roofs and other parts.

Precautions
  1. After the construction is completed, the protective layer should be covered in time ;
  2. When the roll material is not completely bonded to the base surface, people are not allowed to walk on it ;
  3. and sharp objects cannot be placed on the waterproof layer ;
  4. When doing cold construction self-adhesion, the base surface must be clean and dust-free.